48V 100Ah Powerwall — IMP-LW-05B
The 5.12kWh wall unit: 51.2V 100Ah in a 145mm-deep cabinet, 100A continuous discharge, and a 15-module parallel ceiling for walls that grow.
The IMP-LW-05B is the entry powerwall, and its datasheet reads like a checklist of what the category should publish: 51.2V nominal, 100Ah, 5.12kWh; charge voltage 58.4V and discharge cut-off 43V; standard currents of 20A charge and 50A discharge with 100A continuous available in both directions; 6,000 cycles or more at 80% depth of discharge; and operating windows of 0–55°C charging and −20–65°C discharging.
At 615 × 420 × 145mm and about 52kg, it mounts where a boiler or a distribution board would — utility rooms, garages, hallways — without consuming floor space or demanding a plant room. Up to 15 modules parallel on the same bus, so the wall can start at 5.12kWh and finish at over 75kWh without a format change. Bluetooth, Wi-Fi and a heater are published options; communication is RS232, RS485 or CAN.
For installers this is the unit that standardises a residential offer: one mounting pattern, one datasheet, one expansion story. For distributors it is the SKU that answers the single-battery brief, with the 200Ah sister model covering the double-capacity brief in the same cabinet language and the same 145mm depth.
